There are a huge number of different steps that go into the production of everyday food products. Many of those processes are reliant upon electric motors, which can sometimes fail.
These processes often need to run 24/7, and any losses in production can result in fulfillment failure fines (for failing to deliver the required quantity). This exacerbates the cost of downtime, which is something producers are very keen to avoid.
SAM4 condition monitoring provides real-time insights into the health and performance of the motors that drive critical food production processes. SAM4 can detect a fault up to 4 months before that fault causes a motor failure; giving your maintenance engineers sufficient time to repair or replace the motor before unplanned downtime occurs.
Based on feedback from our customers, below are a list of the most critical processes in the food processing industry, as well as how SAM4 can be used to make each process more reliable.
In many factories, pumps are used to transport steam to the necessary location in the food production process.
If these steam pumps fail, the consequent drop in pressure can result in heat loss. Heat is expensive to generate, and so the breakdown of steam pumps can equate to an expensive downtime event.
As you can imagine, the pumps used to transport steam can get quite hot, and this poses a problem if you need to install delicate condition monitoring sensors directly on the asset. SAM4 measures motor current from within the Motor Control Cabinet. This means that the condition monitoring system will continue to function, regardless of the temperature of the pump.
The use of agitators
Agitators are run by electric motors, and are used to mix different substances together inside a tank.
The mixing process is often quite complicated, and requires a specific list of actions to be taken over a number of days. If the agitator breaks during that time, then the product may need to be disposed of. This is expensive both in terms of the disposal of product, and the inability of the plant to create more.
By using condition monitoring, developing faults in agitators can be detected well in advance of a breakdown. Meaning they can be fixed while the agitator is not in use.
Conveyor belts are frequently used in the food processing industry to transport goods to the next area of production, and are often required to run 24/7.
Conveyors also rely on other conveyors to keep the product moving. This means that if one conveyor breaks down, then other conveyors being used in the same process must also stop. In turn, this could result in:
- product spoiling while being stranded on the production line
- product being loaded onto a stationary conveyor, which could result in spilt product and cleaning.
This knock on effect is why a conveyor breakdown can become quite costly for the production process.
SAM4 condition monitoring can be used to monitor conveyor systems 24/7, removing the need to regularly deploy maintenance professionals to manually assess the condition of a conveyor. As mentioned, SAM4 can detect a failure up to 4 months in advance, giving the maintenance team sufficient time to schedule downtime and replace the defective conveyor motor while it is not in use.
These compressors are a key feature of the refrigeration process. If the refrigeration compressors fail, then goods cannot be kept at the required temperature, which may result in product being thrown out.
A longer downtime event may also require production to stop, as there is nowhere to store the new product.
SAM4 condition monitoring can detect a compressor fault up to 4 months in advance of the fault causing a failure. This gives your maintenance team time to schedule downtime when the fridge is empty or is not needed.
Compressed air is used in a number of ways in the food production industry, including:
- cleaning containers before they are filled with food
- blowing the crumbs off fresh bread before it’s packaged
- operating actuators, rotaries and grippers.
As compressed air is so integral to a variety of different processes, air compressors can be situated in multiple different places within a plant. This makes attaching condition monitoring sensors directly to the asset quite inconvenient.
SAM4 can monitor the condition of multiple air compressors from inside the Motor Control Cabinet, meaning you can install condition monitoring for your air compressors quickly and easily, without attaching sensors on each individual asset.
Boek een demo
To find out more about how condition monitoring could make your food processing plant more reliable, contact René Wellens - Business Development Manager by filling in our contact form.